- 2 chanel relay module
-
아두이노 2채널 5V 릴레이 모듈
상품번호 : 20692
-
-
Description
- Genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A
- SMD Optocoupler isolation, driving ability, stable performance; trigger current 5mA
- Voltage : 5V
- Set to high or low triggered by jumper
- Fault-tolerant design, even if the control line is broken, the relay will not operate;
- Power indicator (Green), Relay status indicator (Red)
- Terminal wiring leads, very convenient
- Size: 51mm * 45mm * 18.5mm (L * W * H)
- 4 Mounting holes(3.1mm)
Module interface
- DC + : Positive power supply
- DC - : Negative power connection
- IN1 : 1 channel signal to trigger the end, you can set a high or low level control relay
- IN2 : 2 channel signal to trigger the end, you can set a high or low level control relay
Relay output
- NO1: After a relay normally open interfaces, relay before floating, shorted pull with COM1
- COM1: 1 relay common interface
- NC1: 1 relay normally closed port, COM1 relay shorted before and after the pull-vacant
- NO2: 2-way normally open relay interface, the relay before floating, pull back and COM2 short
- COM2: 2 Common Interface relay
- NC2: 2-way normally closed relay interface relay short front and COM2, pull vacant post
High and Low Trigger Select
- S1 is a relay of high and low trigger selection;
- S2 high and low for the two-way relay trigger selection;
- When Com and Low are short circuit, triggering the corresponding relay is low, while the high end of the short com high trigger
1. 주문하신 물품의 총 결제금액이 15만원 이상 (환율의 변동에 따라 다를 수 있음) 이면 과부가세가 발생합니다. 관부가세는 고객님께서 부담하시는 금액으로 문자를 통해 입금내역이 발송되며 해당 관세사로 입금하시면 통관처리됩니다.
2. 해외구매 특성상 주문에서 배송까지는 평균 10~15일이 소요됩니다. 간혹 현지 제품 수급에 따라 부득이하게 시일이 더 소요 될 수 있으니 구매시 좀 더 여유있게 주문하시길 권합니다.
3. 해외 내수품인 관계로 A/S에 대해서는 별도의 책임을 지지 않습니다.
4. 해외배송 특성상 주문접수후 배송상태가 배송준비중으로 넘어간 경우 해외에서 국내로의 배송이 이루어지고 있다는 뜻입니다. 따라서 배송준비중으로 배송상태가 넘어간 경우 취소및 반품이 불가하므로 이점 양해 부탁드립니다.
5. 타 해외구매대행 사이트에서 주문하신 물건과 주문날짜가 겹치지않도록 주의해 주십시오. 통관날짜가 같을 경우 합산관세가 부가되게 됩니다.