NUCLEO-F411RE

Affordable and flexible platform to ease prototyping using a STM32F411RET6 microcontroller.

Overview

The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.

The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.

The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer.

Microcontroller features

• STM32F411RET6 in LQFP64 package
• ARM®32-bit Cortex®-M4 CPU with FPU
• 100 MHz max CPU frequency
• VDD from 1.7 V to 3.6 V
• 512 KB Flash
• 128 KB SRAM
• GPIO (50) with external interrupt capability
• 12-bit ADC with 16 channels
• RTC
• Timers (8)
• I2C (3)
• USART (3)
• SPI (5)
• USB OTG Full Speed
• SDIO

Nucleo features

• Two types of extension resources
  • Arduino Uno Revision 3 connectivity
  • STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
• On-board ST-LINK/V2-1 debugger/programmer with SWD connector
  • Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
• Flexible board power supply
  • USB VBUS or external source (3.3 V, 5 V, 7 - 12 V)
  • Power management access point
• User LED (LD2)
• Two push buttons: USER and RESET
• USB re-enumeration capability: three different interfaces supported on USB
  • Virtual Com port
  • Mass storage (USB Disk drive) for drag'n'drop programming
  • Debug port

Board pinout

Pins Legend

You can find more details on the available pins and labels in the PeripheralPins.c and PinNames.h files.

These files can be found in:

• ARMmbed/mbed-os repository on GitHub (up-to-date version, used with mbed CLI commands)

https://github.com/ARMmbed/mbed-os/blob/master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F411xE/TARGET_NUCLEO_F411RE/

• mbed-dev library in developer.mbed.org (source files of the mbed library used on mbed compiler IDE)

https://developer.mbed.org/users/mbed_official/code/mbed-dev/file/default/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F411xE/TARGET_NUCLEO_F411RE/

Arduino-compatible headers

Morpho headers

ST X-NUCLEO boards

See Matrix of tested boards.

Other Non-ST boards

See here.

Technical references

For more information, please refer to:

• STM32F411RE microcontroller
• Nucleo board
• SDK changes log