|
|||||||||||||||||
The shield doesn't need external power: it will be provided by the base board, through the 5V and 3.3V pins of the Arduino board used as base.
INPUT and Output
The relays are controlled by the following Arduino board pins:
Relay 1 = Arduino pin 4
Relay 2 = Arduino pin 7
Relay 3 = Arduino pin 8
Relay 4 = Arduino pin 12
The shield features several TinkerKit input/output and communication interfaces. Connecting TinkerKit modules can simplify the creation of a project or a prototype.
The on-board connectors are :
The maximum length and width of the 4 Relays Shield PCB are 2.7 and 2.1 inches respectively. Four screw holes allow the Shield to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.
The shield is compatible with all the Arduino boards, 5V and also 3.3V standards.
A000110
|
|||||||||
회사명 : 원테크
| 사업자등록번호 : 671-34-00660 [사업자정보확인]
| 주소 : 서울특별시 구로구 경인로53길 15 (중앙유통단지) 다동 3123호 통신판매업 신고 : 제 2019-서울구로-1690호 | 연락처 : 02-6679-8533 | FAX : 02-6679-8532 | 개인정보보호 책임자 : 한혜정 | 대표자 : 한혜정 contact : kkseo2@naver.com for more information |
|||||||||