|
|||||||||||||||||
Description: The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a red on black 16x2 LCD connected to our serial backpack. The backpack, based around a PIC16LF88, takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.
Communication with SerLCD requires 3.3V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power, ground and RX pins are all broken out to a 3.5mm pitch screw terminal.
SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the backpack to adjust the contrast.
Note: Though the silkscreen may say ‘5V’, this is a 3.3v Serial LCD. Connect to a 3.3v power source.
Features:
Dimensions: 1.425x3.15" - 1" Thick
Documents:
|
|||||||||
회사명 : 원테크
| 사업자등록번호 : 671-34-00660 [사업자정보확인]
| 주소 : 서울특별시 구로구 경인로53길 15 (중앙유통단지) 다동 3123호 통신판매업 신고 : 제 2019-서울구로-1690호 | 연락처 : 02-6679-8533 | FAX : 02-6679-8532 | 개인정보보호 책임자 : 한혜정 | 대표자 : 한혜정 contact : kkseo2@naver.com for more information |
|||||||||